KUNHEWUHUA Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester


Free Shipping Included! KUNHEWUHUA Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester by KUNHEWUHUA at Microscope Universe. MPN: X-275. Hurry! Limited time offer. Offer valid only while supplies last. Principle Viscosity LND-1 viscometer is the viscosity of the conditions, i.e. a certain amount of the sample at a temperature and a predetermined aperture holes from flowing out of time, in seconds. The following formula can be converted with the sample flow time in seconds (s) into the kinematic viscosity values (mm2 / s). Y = (t-6.0) /0.223 (30s - 100s) Where, t - flow time (s), Y - kinematic viscosity (mm2 / s) Stock up time: 2 days you will receive it within 5-9 working days.--This inst


KUNHEWUHUA Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester by KUNHEWUHUA
4.7 out of 5 stars with 32 reviews
Condition: New
Availability: In Stock
$109.00


Quantity:  

 


Product Description & Reviews

Principle Viscosity LND-1 viscometer is the viscosity of the conditions, i.e. a certain amount of the sample at a temperature and a predetermined aperture holes from flowing out of time, in seconds. The following formula can be converted with the sample flow time in seconds (s) into the kinematic viscosity values (mm2 / s). Y = (t-6.0) /0.223 (30s - 100s) Where, t - flow time (s), Y - kinematic viscosity (mm2 / s) Stock up time: 2 days you will receive it within 5-9 working days.

Features & Highlights

  • --This instrument is mainly used to determine the kinematic viscosity of Newtonian or near-Newtonian fluid coating can also be used in accordance with the need to compare measurements.
  • --The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use.
  • --The viscosity cup is placed on a measuring cup ring with a horizontal bubble, and the horizontal screw of the base is adjusted to center the bubble. The capacity of the receiving cup is about 150 ml, which is used for measuring the liquid.

Additional Information

Brand:
KUNHEWUHUA
Manufacturer:
KUNHEWUHUA
Category:
Viscometers
MPN:
X-275
EAN:
6662783193177
Part Number:
X-275
Publisher:
KUNHEWUHUA
Binding:
Misc.
Package Weight:
3.13 pounds
Package Size:
7.72 x 5.83 x 13.82 inches

 


Have questions about this item (X-275), or would like to inquire about a custom or bulk order?


If you have any questions about this product by KUNHEWUHUA, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: EZ2,
The EZ cup formula for each cup of the series matches the applicable ASTM formula in D 4212 at the recommended calibration level. EZ Cups are compatible to ASTM D 1084 Viscosity of Adhesives and ASTM D 816. Conversion tables that relate to drain time...

mpn: 2102,
BYK-Gardner offers the EZ and Signature brand zahn cups. These cups are also widely used for many industrial applications.BYK-Gardner offers the EZ and Signature brand zahn cups. These cups are also widely used for many industrial applications. Rang:...

mpn: M-51, ean: 0536936908948,
Product Description NDJ-1 rotary viscometer is a new instrument used for determining the liquid viscose capacity and the absolute viscosity. NDJ-1 has been widely used to determine and measure the liquid viscosity in many applications such as grease...

mpn: 0571,
Inscription GARDNER MT in amber stain; inside diameter is checked for 10.65 +/- 0.025 MM. Note: Amber markings in permanent stain are located on the empty tubes for establishing correct bubble size.For use in retaining samples. Used with all grades o...