Air Sampling Filters / Lab Filters - Page 2


Save on Air Sampling Filters (in Lab Filters) at Microscope Universe, Page 2 [37]. Top brands include ACE Glass, & Foxx Life Sciences. Hurry! Limited time offers. Offers valid only while supplies last.



ACE GLASS 7538-09 Impinger Stopper only, Sherer Impinger Type, 8 mm OD Tube End Inlet/Outlet
By ACE Glass
In Stock
$179.00

mpn: 7538-09,

4.7 out of 5 stars with 12 reviews
Consists of bottle with hex base and 45/50 joint, SO2 bubbler stopper with 25 mm diameter Por. C (25-50m) fritted disc, and impinge stopper. Capacity, 275mL. Inlet/outlet are 8mm.Sheerer Impinge Type. 8mm OD Tube. End Inlet/Outlet.


ACE GLASS 7506-06 Ace-Thread Nylon Bushing, -110 Fetfe O-Ring, Accepts 12.5-14 mm OD Tubing, 15 mm Diameter
By ACE Glass
In Stock
$16.00

mpn: 7506-06,

4.5 out of 5 stars with 17 reviews
Bushing connector for joining an can accommodate-thread to a reduced end tube. Assorted Bushing and O-Ring materials.-110 Fetfe O-Ring. Accepts 12.5-14Mm od tubing. 15Mm diameter.


ACE Glass 7531-32 Stopper Impinger, 12/5 Ball Inlet/Outlet Stopper, 24/40 Joint, Open Tube End Nozzle
By ACE Glass
In Stock
$70.12

mpn: 7531-32,

4.7 out of 5 stars with 26 reviews
Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30Ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 cfm at 30.5cm (12in) vacuum. The stopper Inlet is available as an open tube end, 12/5 ball or 12/50 socket. The stopper Outlet is available as an open tube end or a 12/5 ball.12/5 ball inlet/outlet stopper. 24/40 joint. Open tube end nozzle.


FOXX Life Sciences 332-6712-OEM EZwaste Safety Vent, Carboy, HDPE with VersaCap 120mm and EZ Top Adapter, 75 Litre Capacity
By Foxx Life Sciences
In Stock
$599.04

mpn: 332-6712-OEM,

4.0 out of 5 stars with 49 reviews
Ez-waste solvent waste system is designed to be an affordable solution for liquid waste disposal. Carbon exhaust filter traps solvent vapors, tube fittings secure waste tubes to carboy, providing the closes system necessary to prevent spills. 90° adapter included for maximum storage flexibility. Versa cap technology eliminates need to remove tubing from open cap to install closed cap. Plugs included for unused ports. Closed 83B versa cap included for safe transport. Replaceable sulfur cured EPD


ACE GLASS 7519-09 Filter Support Assembly, Part C, 76 mm Diameter
By ACE Glass
In Stock
$12.00

mpn: 7519-09,

4.6 out of 5 stars with 43 reviews
Filter support assembly for collecting dust particles in a stack sampling system. Available in either 51mm (2''), 76mm (3'') or 102mm (4'') (illustrated) size. Consists of: PART A, with 28/15 outer joint bent perpendicular to flow path; PART B, with seat for fritted disc and 28/15 inner joint; PART C, neoprene gasket used to seal filter paper and prevent leakage around filter; PART D, porosity B fritted disc. Use 7670-18 to clamp 51mm size, 6509-03 for 76mm size, and 6509-05 for the 102mm size.F


ACE GLASS 7499-15 Air Sampling Bleed Adapter, 50 Ace-Thread, Glass Only, 50 mm OD
By ACE Glass
In Stock
$318.00

mpn: 7499-15,

4.9 out of 5 stars with 55 reviews
Adjustable bleed adapter used for reducing air flow in the Air Sampling Manifold to prevent a pressure drop across the sampling ports. Normally installed in front of the 7511 blower, in line with the manifold. Positioning of holes in threaded nylon plug controls the volume of air flow. Plug supplied with O-Ring.Normally installed in front of the 7511 blower. In line with the manifold. Positioning of holes in threaded nylon plug controls the volume of air flow.


ACE GLASS 7533-18 Midget Bubbler, Complete with 0-25 mL Graduated Bottle and #7 Ace-Safe and Trade, Stopper with Porosity A Filter Tip
By ACE Glass
In Stock
$160.00

mpn: 7533-18,

4.1 out of 5 stars with 58 reviews
Used for sampling air volumes at low jet velocity. Bottle joint is 24/40. Stopper uses #7 Ace-Safe removable hose connections for easy connect/disconnect. Impinge nozzle calibrated to deliver 0.09 to 0.11 CFM at 30.5cm (12'') H2O vacuum. Bubbler nozzle has sintered glass filter, porosity A (145-175 microns) or porosity B (70-100 microns). Bottle has encircling graduations from 0 to 25mL or 0 to 30mL in 5mL divisions. Complete item supplied with connectors and bushings.Bottle joint is 24/40. Stop


FOXX Life Sciences 332-5712-OEM EZwaste Safety Vent, Carboy, HDPE with VersaCap 120mm and EZ Top Adapter, 40 Litre Capacity
By Foxx Life Sciences
In Stock
$409.62

mpn: 332-5712-OEM,

4.3 out of 5 stars with 37 reviews
Ez-waste solvent waste system is designed to be an affordable solution for liquid waste disposal. Carbon exhaust filter traps solvent vapors, tube fittings secure waste tubes to carboy, providing the closes system necessary to prevent spills. 90° adapter included for maximum storage flexibility. Versa cap technology eliminates need to remove tubing from open cap to install closed cap. Plugs included for unused ports. Closed 83B versa cap included for safe transport. Replaceable sulfur cured EPD


ACE GLASS 7499-23 Air Sampling Bleed Adapter, 50 Ace-Thread, Complete, 50 mm OD
By ACE Glass
In Stock
$425.00

mpn: 7499-23,

4.5 out of 5 stars with 59 reviews
Adjustable bleed adapter used for reducing air flow in the air sampling manifold to prevent a pressure drop across the sampling ports. Normally installed in front of the 7511 blower, in line with the manifold. POSITIONING of holes in threaded nylon plug controls the volume of air flow. Plug supplied with O-Ring.Normally installed in front of the 7511 blower. In line with the manifold. Positioning of holes in threaded nylon plug controls the volume of air flow.


ACE GLASS 7495-27 Air Sampling Tee with Top Threaded, 25 mm OD
By ACE Glass
In Stock
$206.00

mpn: 7495-27,

4.9 out of 5 stars with 57 reviews
ACE Glass 7495-27 Air Sampling Tee with Top Threaded, 25mm OD, Sampling tee with top threaded, side and bottom tubes reduced for use with 7506 bushing.With top threaded. For use with 7506 bushing. Side and bottom tubes reduced.


ACE Glass 7531-25 Impinger, Complete with 12/5 Ball Inlet/Outlet Stopper, Calibrated Nozzle, 25 mL Capacity
By ACE Glass
In Stock
$96.27

mpn: 7531-25,

4.3 out of 5 stars with 11 reviews
Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30Ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 cfm at 30.5cm (12in) vacuum. The stopper Inlet is available as an open tube end, 12/5 ball or 12/50 socket. The stopper Outlet is available as an open tube end or a 12/5 ball.Complete with 12/5 ball inlet/outlet stopper. Calibrated nozzle. 25Ml capacity.


ACE GLASS 7490-37 Air Sampling Sweep Elbow, 25 mm Diameter
By ACE Glass
In Stock
$210.00

mpn: 7490-37,

4.5 out of 5 stars with 37 reviews
Sweep elbow, available with one end threaded, the other end reduced for use with 7506 bushing or both ends threaded for use with either 7506 bushing or 5841 coupling.25mm size. Available with one end threaded. For use with either 7506 bushing or 5841 coupling.


ACE GLASS 7501-15 Air Sampling Collection Bottle, 50 mm Diameter, 250 mL Capacity
By ACE Glass
In Stock
$171.00

mpn: 7501-15,

4.5 out of 5 stars with 16 reviews
Collection bottle, usually connected to the bottom arm of the 7495 tee with reduced ends, to collect heavy particulates before they enter the manifold train.250Ml capacity. 50Mm bottle. To collect heavy particulates before they enter the manifold train.


ACE GLASS 7489-26 ACE Glass Complete Carb Octopus Air Sampling System, 8 Port Manifold, 25mm Funnel Cane with Calibration Port, Collection Bottle, PTFE Isolating Bushings and Plugs
By ACE Glass
In Stock
$1,285.16

mpn: 7489-26,

4.3 out of 5 stars with 46 reviews
The vertically mounted carb octopus air sampling manifold design features an inner tube which allows condensation to drip to the Collection bottle and away from the #7 can accommodate-thred instrument ports. Available in standard 4 or 8 port configurations.Available in standard 4 or 8 port configurations. 7 ace-thred instrument ports. Allows condensation to drip to the collection bottle.


ACE Glass 7489-04 Carb Octopus Air Sampling Manifold, 7 Ace-Thred Ports, 4 Port Configurations
By ACE Glass
In Stock
$431.38

mpn: 7489-04,

4.9 out of 5 stars with 38 reviews
The vertically mounted carb octopus air sampling manifold design features an inner tube which allows condensation to drip to the Collection bottle and away from the #7 can accommodate-thred instrument ports. Available in standard 4 or 8 port configurations.Available in standard 4 or 8 port configurations. 7 ace-thred instrument ports. Allows condensation to drip to the collection bottle.


ACE Glass 7531-37 Impinger, Complete with 12/5 Socket Inlet, 12/5 Ball Outlet Stopper, Open Tube End Nozzle, 25 mL Capacity
By ACE Glass
In Stock
$99.69

mpn: 7531-37,

4.8 out of 5 stars with 60 reviews
Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30Ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 cfm at 30.5cm (12in) vacuum. The stopper Inlet is available as an open tube end, 12/5 ball or 12/50 socket. The stopper Outlet is available as an open tube end or a 12/5 ball.Complete with 12/5 socket inlet. 12/5 ball outlet stopper. Open tube end nozzle. 25Ml capacity.


ACE Glass 7531-36 Stopper Impinger, 12/5 Socket Inlet, 12/5 Ball Outlet, 24/40, Open Tube End Nozzle
By ACE Glass
In Stock
$70.12

mpn: 7531-36,

4.5 out of 5 stars with 59 reviews
Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30Ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 cfm at 30.5cm (12in) vacuum. The stopper Inlet is available as an open tube end, 12/5 ball or 12/50 socket. The stopper Outlet is available as an open tube end or a 12/5 ball.12/5 socket inlet. 12/5 ball outlet. Easy to use. Open tube end nozzle.


ACE GLASS 5112-14 Series Septum Inlet Adapter, Two Ports, 24/40 Joint
By ACE Glass
In Stock
$67.57

mpn: 5112-14,

4.4 out of 5 stars with 44 reviews
Air-sensitive sample handling adapter features either a glass or PTFE t-bore Stopcock, standard taper joint and septum port arms. Supplied with two Septa, can accommodate 9096 family.2 ports. 24/40 joint. Sold in each.


ACE Glass 7525-20 Imhoff Sedimentation Cone, Blunt Tip
By ACE Glass
In Stock
$111.09

mpn: 7525-20,

4.1 out of 5 stars with 59 reviews
Imhoff sedimentation cone for the determination of settle able matter in water. Either blunt tip or Ace-Thred tip for environmental applications. Graduated from 0-2ml in 0.1ml divisions, 2-10ml in 0.5ml divisions, 10-40ml in 1ml divisions, 40-100ml in 2ml divisions.Blunt tip. Graduated from 0-2ml in 0.1Ml divisions. Either blunt tip or ace-thred tip for environmental applications.


ACE Glass 7531-33 Impinger, Complete with 12/5 Ball Inlet/Outlet Stopper, Open Tube End Nozzle
By ACE Glass
In Stock
$99.69

mpn: 7531-33,

4.7 out of 5 stars with 51 reviews
Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30Ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 cfm at 30.5cm (12in) vacuum. The stopper Inlet is available as an open tube end, 12/5 ball or 12/50 socket. The stopper Outlet is available as an open tube end or a 12/5 ball.Complete with 12/5 ball inlet/outlet stopper. Open tube end nozzle. Easy to use.



Viewing Page 2 of 4

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - microscopeuniverse.com. All Rights Reserved.