Inline Filters / Lab Filters - Page 2 - Huge Savings! Save up to 13%


Huge Savings! Up to 13% off on Inline Filters (in Lab Filters) at Microscope Universe, Page 2 [34]. Top brands include Pall, WHATMAN, GE, Kimble, Environmental Express, Whatman, & AJVS. Hurry! Limited time offers. Offers valid only while supplies last.



Pall 12095 AcroPak 200 Capsules with Supor EKV Membrane, 0.2 µm Pore Size, 13 mm Sanitary Flange, Pack of 3
By Pall
In Stock
$222.00

mpn: 12095,

4.7 out of 5 stars with 39 reviews
Filter Media: Supor EKV [hydrophilic polyethersulfone (PES)] membrane Housing: Polypropylene Sealing Technology: Thermal bonding without adhesives Filling Bell: Polycarbonate (no filling bell on sanitary option) Type: Capsule Filter Use: Microfiltration Pore Size: 0.2  μm Effective Filtration Area:  220 cm Housing Diameter: 5.3 cm without vent, 6.7 cm with vent  Inlet/Outlet Connections: 13 mm (1/2 inch) sanitary flange inlet/outlet Typical Liquid Flow Rate: 350 mL/min/0.1 bar (241 mL/min/p


Filter Capsule,1/4in to 3/8in Tube
By WHATMAN
In Stock
$288.20
4.0 out of 5 stars with 47 reviews
Recommended for filtration of large volumes of liquids or gases. Pleated cartridges provide large membrane surface area within a compact capsule housing for high throughput and high flow rates.Specifictions:Item: Filter CapsuleDiameter: 36mmPore Size: 0.2micron mInlet Connection: 1/4'' to 3/8'' TubingOutlet Connection: 1/4'' to 3/8'' TubingHousing Material: PolypropyleneFilter Material: PolypropyleneMax. Operating Pressure: 60 psiAutoclavable: Yes''


GE - POLYVENT 500 0.2 PTFE , EA1
By GE
In Stock
$85.71

mpn: 6713-5036,

4.8 out of 5 stars with 7 reviews
PolyVENT 500, 1/4 to 3/8'' SB, outlet 1/4 to 3/8'' SB PolyVENT are integral filter products for sterile venting of vessels and tanks. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO. Testable by Water Break Through (WBT) test or bubble point testing. Pass USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Bidirectional and autoclavable. These devices are constructed from a single, standardized set of


GE - STERIVENT 2000 0.2TF H/H , EA1
By GE
In Stock
$138.77

mpn: 2108,

4.8 out of 5 stars with 24 reviews
SteriVENT 150, 0.2 µm, 1 1/2'' inlet sanitary, 1 1/2'' outlet sanitary SteriVENT are integral filter products for sterile venting of vessels and tanks. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO. Testable by Water Break Through (WBT) test or bubble point testing. Pass USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Bidirectional and autoclavable. These devices are constructed from a single, s


GE - POLYCAP 75 0.2 PTFE F/F , PK5
By GE
In Stock
$514.80

mpn: 2702M,

4.8 out of 5 stars with 26 reviews
Polycap TF 75, 0.2 µm, with MNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistant to most solvents, autoclavable, and integrity-testable. Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes. 0.05 µm capsules designed for ultra-clean applications; 1.0 µm used for extended life and filtration of highly contaminated solutio


GE - POLYCAP 36 0.2 PTFE G/G , PK5
By GE
In Stock
$398.70

mpn: 2601T,

4.9 out of 5 stars with 57 reviews
Polycap TF 36, 0.2 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistant to most solvents, autoclavable, and integrity-testable. Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes. 0.05 µm capsules designed for ultra-clean applications; 1.0 µm used for extended life and filtration of highly contaminated solutio


Kimble Chase FILTER ASSY 47MM SS SUPPRT47 mm Microfiltration Assembly with SS Support and GL 45 Style Bottle - KMBL
By Kimble
In Stock
$397.40

mpn: 953800-5347,

4.2 out of 5 stars with 54 reviews
ULTRAWARE ADAPTER This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. It has a stainless steel support and is recommended for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate. Supplied with funnel, clamp, 304 stainless steel support screen, PTFE gasket, glass support base, tubing adapter with o-ring, PBT cap, sealing ring and vacuum/pressure bottle


GE - POLYDISC 50 O.45 PTFE , PK10
By GE
In Stock
$148.64

mpn: 6720-5045,

4.3 out of 5 stars with 51 reviews
Polydisc TF, 0.45 µm Polydisc TF is a lightweight unit is particularly suitable for protective vents and for in-line filtration and isolation applications. Solvent-resistant membrane. Chemical-resistant housing. Hydrophobic PTFE membrane. Autoclavable (multiple times). Integrity-testable (bubble point or water breakthrough pressure in situ methods). Biosafe. Lightweight: Avoids the collapsing of tubing that can be caused by heavy filter devices. This device features a PTFE membrane, which is id


GE - POLYVENT 1000 0.2 PTFE , EA1
By GE
In Stock
$112.82

mpn: 6713-1075,

4.3 out of 5 stars with 30 reviews
PolyVENT 1000, inlet 3/8 to 1/2'' SB, outlet 3/8 to 1/2'' SB PolyVENT are integral filter products for sterile venting of vessels and tanks. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO. Testable by Water Break Through (WBT) test or bubble point testing. Pass USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Bidirectional and autoclavable. These devices are constructed from a single, standardized


GE - POLYCAP 75 0.2 PTFE G/G , PK5
By GE
In Stock
$514.80

mpn: 2702T,

4.0 out of 5 stars with 16 reviews
Polycap TF 75, 0.2 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistant to most solvents, autoclavable, and integrity-testable. Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes. 0.05 µm capsules designed for ultra-clean applications; 1.0 µm used for extended life and filtration of highly contaminated solutio


GE - POLYCAP 36 1.0 PTFE G/G , PK5
By GE
In Stock
$398.70

mpn: 2603T,

4.1 out of 5 stars with 13 reviews
Polycap TF 36, 1.0 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistant to most solvents, autoclavable, and integrity-testable. Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes. 0.05 µm capsules designed for ultra-clean applications; 1.0 µm used for extended life and filtration of highly contaminated solutio


Environmental Express SC0401 FilterMate Filtration System, 5 µm PTFE Filter (Pack of 100)
By Environmental Express
In Stock
$137.22
$134.00
You Save: 2%

mpn: SC0401,

4.6 out of 5 stars with 24 reviews
The Filter Mate Filtration System provides a convenient and inexpensive method of filtration requiring no transfer steps. The Filter Mate fits directly into the digestion vessel and is pushed through the liquid being filtered to the bottom of the cup with a detachable plunger. After filtration is complete, the plunger is removed and discarded while the filter assembly remains in the bottom of the cup. This arrangement does not interfere with storage or use of the vessel in an auto sampler.Standa


Adapter, Connecting, Transparent,
By Kimble
In Stock
$89.47
$84.71
You Save: 5%

mpn: 179920-0510,

4.4 out of 5 stars with 44 reviews
CONNECTING ADAPTER Connects to vacuum systems, NMR tubes, photochemical cuvettes, lyophilizing tubes, flowmeters, etc. • Simple o-ring connections form a vacuum seal on glass tubing by tightening the compression cap • Supplied with FKM o-ring and open top polypropylene cap • Body is PTFE Replacement Parts Connects OD (mm) : 5 to 10 O-Ring Size : 108 / 110 Case Qty : 1KIMBLE - Adapter Univ 5 X 10 mm , EA1.


Whatman 6720-5001 50 mm in-Line Filters, PTFE, 0.1µm, 10/pk
By Whatman
In Stock
$173.90
$151.22
You Save: 13%

mpn: 6720-5001,

4.4 out of 5 stars with 25 reviews
Filter up to one liter with one device; filtration area is 16 cm2. Filter devices can be used in conjunction with a syringe or connected in-line (6 to 10 mm hose) via stepped hose Barbs. Autoclavable, a high-purity polypropylene housing maintains sample purity. Hold up volume with air Purge is less than 0.1 ml. Maximum operating pressure is 60 psi (4.1 bar). filters with PTFE membrane are ideal for chemically aggressive solutions, reagents, and organic solvents. Use as protective vents or for in


Vacuum Filter, CSL Series, Vacuum Pump Filter, Kf 25, Black Finish, Csl-842-nw25b
By AJVS
In Stock
$211.00

mpn: PN17735,

4.3 out of 5 stars with 31 reviews
Filter Element Included along with mounting clamp and centering oring. Features: Positive O-ring seal system Carbon steel construction Seamless drawn housing Large dirt holding capacity and easy field cleaning, especially when mounted horizontally or inverted Vacuum leak rate: Typically 1 x 10-5 mmHg Stainless steel ISO flanges Applications: Leak Detection Medical Vacuum Coating Vacuum Pump-Rotary Piston Vacuum Pump-Rotary Vane Scroll Dry Pump Backstreaming-Protect the system from pump fluid or



Viewing Page 2 of 2

Browse Our Catalog