Vacuum Traps / Vacuum & Pump Equipment - Page 2 - Huge Savings! Save up to 11%


Huge Savings! Up to 11% off on Vacuum Traps (in Vacuum & Pump Equipment) at Microscope Universe, Page 2 [264]. Top brands include Chemglass, LABOY, BEST VALUE VACS, SP Scienceware, Deschem, Festo, & Piab. Hurry! Limited time offers. Offers valid only while supplies last.



Chemglass CG-4513-11 Vacuum Trap with #40 O-Ring Joint, 45mm OD x 250mm Length
By Chemglass
In Stock
$200.45
$188.64
You Save: 6%

mpn: CG-4513-11,

4.3 out of 5 stars with 50 reviews
Similar to cg-4515 traps but having an O-Ring joint to connect the trap body to the stopper. O-Ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Complete trap is supplied with a stopper, lower body, Viton O-Ring, and uses. Pinch clamp.45Mm od. 250Mm length. 40 o-ring joint.


Chemglass CG-4529-02 Series CG-4529 Vacuum Trap Complete, 1000 mL Capacity, Fits 4300 mL Dewar Flask, 340 mm Height, 130 mm Width
By Chemglass
In Stock
$144.14

mpn: CG-4529-02,

4.5 out of 5 stars with 44 reviews
Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in O.D. Trap is designed to fit into standard CG-1593 through CG-1595 dewar flasks.1000Ml capacity. 340Mm height. 130Mm width. Fits 4300mL dewar flask.


Chemglass CG-4513-12 Vacuum Trap with #50 O-Ring Joint, 58mm OD x 275mm Length
By Chemglass
In Stock
$220.23

mpn: CG-4513-12,

4.0 out of 5 stars with 12 reviews
Similar to cg-4515 traps but having an O-Ring joint to connect the trap body to the stopper. O-Ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Complete trap is supplied with a stopper, lower body, Viton O-Ring, and uses. Pinch clamp.56Mm od. 275Mm length. 50 o-ring joint.


Chemglass CG-4515-03 Complete Serrated Hose Connection Vacuum Trap with 40/50 Joint, 45mm OD x 250mm Overall Length
By Chemglass
In Stock
$143.20
$134.78
You Save: 6%

mpn: CG-4515-03,

4.8 out of 5 stars with 31 reviews
Two piece construction for easy removal of condensate. Inlet and Outlet are 180° apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body Length is the overall Length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. Of 13mm at the smallest serration and 16mm at the largest serration.45Mm od trap bottle. 40/50 joint. 250Mm length.


Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 29/42 Joint, 32mm OD x 200mm Overall Length
By Chemglass
In Stock
$110.85
$104.31
You Save: 6%

mpn: CG-4515-01,

4.3 out of 5 stars with 18 reviews
Two piece construction for easy removal of condensate. Inlet and Outlet are 180° apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body Length is the overall Length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. Of 13mm at the smallest serration and 16mm at the largest serration.32Mm od trap bottle. 29/42 joint. 200Mm length.


Chemglass CG-4525-02 Series CG-4525 Cold Finger for Model CG-4525-01, 55/50 Joint
By Chemglass
In Stock
$99.27

mpn: CG-4525-02,

4.4 out of 5 stars with 56 reviews
Dual chamber vacuum trap affords increased condensing capacity in a much shorter Length. The dry ice cold fingers have 55/50 inner joints that fit into the outer joints on the main trap body and have a capacity of approx. 300Ml each. Lower Stopcock is a PTFE 4mm ''t''-bore which permits draining condensate chambers one at a time. Serrated connections at the top of the condensate chambers have an O.D. Of 10mm. Complete trap assembly is approx. 545mm in height x 220mm wide.For CG-4525-02 cg-4525-0


Laboy HMV010212 Glass Vacuum Trap with 45/50 Joint 250 mm Length Below Joint 22 mm Tube O.D.
By LABOY
In Stock
$51.50
$45.83
You Save: 11%

mpn: HMV010212,

4.9 out of 5 stars with 31 reviews
With joints for easy removal of condensate. Body Length is measured below the joint. Beijing Weichengya Laboratory Equipment Co., Ltd. was founded in 1999, focusing on the research, development, manufacture, sale and after-sales service of laboratory equipment.Vacuum trap. 22 mm in inner tube o.D. With 40/50 joint. 250 mm in length below joint. Made by hand blowing.


Chemglass CG-4515-02 Complete Serrated Hose Connection Vacuum Trap with 34/45 Joint, 38mm OD x 225mm Overall Length
By Chemglass
In Stock
$126.10
$118.66
You Save: 6%

mpn: CG-4515-02,

4.7 out of 5 stars with 39 reviews
Two piece construction for easy removal of condensate. Inlet and Outlet are 180° apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body Length is the overall Length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. Of 13mm at the smallest serration and 16mm at the largest serration.38Mm od trap bottle. 34/45 joint. 225Mm length.


Best Value Vacs 5 Gallon Aluminum Resin Trap Vacuum Chamber
By BEST VALUE VACS
In Stock
$163.00

mpn: BVV5G-RT,

4.7 out of 5 stars with 19 reviews
This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this shatter chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off


Wilmad LG-11013-104 Complete Vacuum Trap with Hose Connection, One-Piece, 35 mm OD x 250 mm Length
By SP Scienceware
In Stock
$90.17

mpn: LG-11013-104,

4.7 out of 5 stars with 50 reviews
Widely used to protect vacuum pumps from contamination. 3/8'' hose connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. Frequently used with liquid nitrogen Dewar to provide rapid condensation of volatiles. Scientists rely on the expertise and artistic skills of Wilmad-LabGlass' engineers and glass specialists to manufacture NMR and EPR consumables and laboratory glassware of the highest quality. Used daily in academia, healthcare and chemical,


Best Value Vacs Extractor Resin Trap with Dip Tube
By BEST VALUE VACS
In Stock
$250.00

mpn: EXRT,

4.7 out of 5 stars with 9 reviews
An Extractor Resin Trap is designed to be put inline between your extractor and molecular sieve filter drier to prevent resins or particulate from passing through the system.


Chemglass CG-4515-04 Complete Serrated Hose Connection Vacuum Trap with 50/50 Joint, 54mm OD x 275mm Overall Length
By Chemglass
In Stock
$176.26

mpn: CG-4515-04,

4.7 out of 5 stars with 58 reviews
Two piece construction for easy removal of condensate. Inlet and Outlet are 180° apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body Length is the overall Length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. Of 13mm at the smallest serration and 16mm at the largest serration.54Mm od trap bottle. 50/50 joint. 275Mm length.


Deschem 500ml,24/40,Glass Complete Vacuum Sublimation Apparatus,Lab Capacity Resevoir
By Deschem
In Stock
$99.99

mpn: 331180151290, ean: 6971311075916,

4.7 out of 5 stars with 40 reviews
500ml,24/40,Glass Complete Vacuum Sublimation Apparatus,Lab Capacity ResevoirFlask:500mlJoint:24/40Stopcock:PTFEBe Made From G3.3 Borosilicate Glass. Annealing Point ------560℃. Linear Coefficient of Expansion------ 32×10-7/℃. Softening Point------820℃.


Festo Ovem-10-H-B-Qs-Oe-N-2P,Vacuum Generator Ovem, Alt Id: 539074 Ovem-10-H-B-Qs-Oe-N-2P
By Festo
In Stock
$384.38

mpn: OVEM-10-H-B-QS-OE-N-2P,

4.7 out of 5 stars with 58 reviews
Festo Ovem-10-H-B-Qs-Oe-N-2P,Vacuum Generator Ovem,Ejector Pulse,With Open Silencer,Prepared For Common Supply Manifoldalt Id: 539074Weight: 2.67lb. Product Dimensions: 8.00 x 8.00 x 7.00 inches. Condition: New.


Laboy HMV010105 Glass Vacuum Trap with #15 O-Ring Joint and 45/50 Taper Joint 50 mm O.D.
By LABOY
In Stock
$55.37
$49.67
You Save: 10%

mpn: HMV010105,

4.2 out of 5 stars with 27 reviews
Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Supplied with two ASR116 PTFE O-rings. The length of outer body below joint is 250mm, the O.D of inner and side tube is 18mm.Capacity of 500mL.Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree Celsius, can be heated directly in an open flame and can withstand typica


Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap, For Large Volume Solvent Vapor
By Chemglass
In Stock
$560.47

mpn: CG-4519-01,

4.1 out of 5 stars with 48 reviews
Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. Plastic coated to contain solvent in case of breakage and supplied complete with a UHMW lid with handle.Solvent vapor. Plastic coated. Sold in each.


Piab 0114449, Multibellow Suction Cup, 0.39" Curve Radius, 0114449
By Piab
In Stock
$19.74

mpn: 0114449,

4.3 out of 5 stars with 16 reviews
Piab 0114449,Multibellow Suction Cup,0.39'' Curve Radius,0.55'' Max Vert,For Mark Free, Plastic Injection Mopded Parts, Dry Sheet Metal, Corrugated/ Cardboard,.61 Cubic'' Volume,1/4'' Male G Thread Fitting,Weight: 0.67lb. Product Dimensions: 8.00 x 8.00 x 7.00 inches. Condition: New.


Best Value Vacs 10 Gallon Aluminum Resin Trap Vacuum Chamber
By BEST VALUE VACS
In Stock
$255.00

mpn: BVV10G-RT,

4.3 out of 5 stars with 43 reviews
This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this shatter chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off


Piab B30-2.20.04Ab, Bellowed Silicone Suction Cup, Pack of 2 - B30-2.20.04Ab - Pack of 2 -
By Piab
In Stock
$44.00

mpn: B30-2.20.04AB - PACK OF 2 -,

4.2 out of 5 stars with 38 reviews
Piab B30-2.20.04Ab,Bellowed Silicone Suction Cup,-Pack Of 2 -.59'' Curve Radius,.55'' Max Vertical Movement,For Plastic Injection Model Parts And Dry Sheet Metal,.61 Cubic'' Volume,.25'' Male G Thread Fitting,1.62'' X 1.34''Weight: 1.67lb. Product Dimensions: 8.00 x 8.00 x 7.00 inches. Condition: New.


Best Value Vacs 15 Gallon Aluminum Resin Trap Vacuum Chamber
By BEST VALUE VACS
In Stock
$295.00

mpn: BVV15G-RT,

4.3 out of 5 stars with 49 reviews
This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this shatter chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off



Viewing Page 2 of 3