Freeze Dryers / Heating & Cooling Equipment - Page 3 - Super Savings! Save up to 38%


Super Savings! Up to 38% off on Freeze Dryers (in Heating & Cooling Equipment) at Microscope Universe, Page 3 [249]. Top brands include Labconco, & Master-Bilt. Hurry! Limited time offers. Offers valid only while supplies last.



Labconco 7522900 Drying Chamber for Benchtop Freeze Dry Systems, 16 Port
By Labconco
In Stock
$2,800.00
$2,620.00
You Save: 6%

mpn: 7522900,

4.0 out of 5 stars with 27 reviews
The 16-Port Drying Chamber includes 16 neoprene valves that accommodate both 1/2'' and 3/4'' adapters for connection of flasks. It is compatible with any FreeZone 6, 12 or 18 Liter Freeze Dry System. It may also be used with any FreeZone Plus 4.5 Liter or FreeZone -105 C 4.5 Liter Cascade Freeze Dry SystemDrying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk.


Labconco 7552200 Borosilicate Glass Lyph-Lock Flask Top for 100ml and 250ml Flasks, 19/38 Standard Taper Joint
By Labconco
In Stock
$39.96

mpn: 7552200,

4.5 out of 5 stars with 37 reviews
Flask Tops are made of high strength borosilicate glass to withstand extreme temperatures and high vacuum.


Labconco 7544810 Replacement Filter Paper for Fast Freeze Flask (Pack of 1000)
By Labconco
In Stock
$109.00

mpn: 7544810,

4.6 out of 5 stars with 55 reviews
Labconco Corporation manufactures laboratory furniture and equipment such as hoods, ventilated enclosures, and glassware washers for general laboratory use. The company, founded in 1925, is headquartered in Kansas City, MO.Filter paper for use with Fast Freeze flask (sold separately). 1''/28mm diameter. 17 micron pore size. Pack of 1,000.


Labconco 7521001 Stainless Steel Heated Drying Chambers, 230V, 50/60 Hz
By Labconco
In Stock
$3,367.22

mpn: 7521001,

4.5 out of 5 stars with 44 reviews
Clear acrylic cover, neoprene gaskets and electrical passthrough for transformer cords. Include three shelf product heater consisting of three 6.5'' diameter aluminum shelves with 1/4'' ims, three stainless steel support rods, nine clips for shelf height adjustment, low voltage transformer with variable heat controlThree rubber feet.


Labconco 7442700 Stainless Steel Tube Holder for Freeze Dry System, 2.0 mL Microcentrifuge Tubes, Hold 30 Tube
By Labconco
In Stock
$249.00

mpn: 7442700,

4.0 out of 5 stars with 43 reviews
Accommodates up to 30 each 2.0 mL microcentrifuge tubes in an upright position inside a 750 mL or larger Fast-Freeze Flask or Lyph-Lock FlaskAccommodates up to 30 each.


Labconco 7522800 Drying Chamber for Benchtop Freeze Dry Systems, 12 Port
By Labconco
In Stock
$1,987.71
$1,676.00
You Save: 16%

mpn: 7522800,

4.2 out of 5 stars with 13 reviews
The 12-Port Drying Chamber includes 12 neoprene valves that accommodate both 1/2'' and 3/4'' adapters for connection of flasks. It is compatible with any FreeZone 1, 2.5, 6, 12 or 18 Liter Freeze Dry System. It may also be used with any FreeZone Plus 4.5 Liter or FreeZone -105 C 4.5 Liter Cascade Freeze Dry SystemDrying Chambers provide a means to attach flasks to your freeze dry system or contain samples in bulk.


Labconco 7439903 Glass Lid for Freeze Dry System, Small
By Labconco
In Stock
$627.00

mpn: 7439903,

4.6 out of 5 stars with 16 reviews
Replaces the acrylic lid that covers the collector chamber on any FreeZone 4.5 Liter Freeze Dry System. Provides additional protection from solvents and corrosives that attack acrylic, such as acetonitrile. Glass with neoprene gasketDescription : GLASS LID SMALL FOR 4.5L FD. Supplier No : 7439903. Unit : Each.


Labconco 7442600 Stainless Steel Tube Holder for Freeze Dry System, 12 or 13 millimeter Tubes, Hold 15 Tube
By Labconco
In Stock
$250.01
$249.00

mpn: 7442600,

4.8 out of 5 stars with 15 reviews
Accommodates up to 15 each 12 or 13 millimeter diameter tubes in an upright position inside a 750 mL or larger Fast-Freeze Flask or Lyph-Lock FlaskAccommodates up to 15 each.


Labconco 7670521 FreeZone 2.5 Liter Benchtop Freeze Dry System with PTFE-Coated Collector, 115V, 60 Hz
By Labconco
In Stock
$8,460.65
$8,210.00
You Save: 3%

mpn: 7670521,

4.8 out of 5 stars with 47 reviews
FreeZone 2.5 Liter Benchtop Freeze Dry System is designed for light sample loads or personal use. Compact design with small footprint fits in tight spaces. Epoxy-coated steel exterior. Upright stainless steel collector coil removes a maximum of 2 liters of water in 24 hours and holds 2.5 liters of ice before defrosting is necessary. Features 1/4 hp refrigeration system; LCD for display of set up and operating parameters, alarm messages and total number of hours since refrigeration and vacuum wer


Labconco 7688500 Rubber Lid Gasket for Freeze Dryer, 9"x12"
By Labconco
In Stock
$75.56

mpn: 7688500,

4.0 out of 5 stars with 54 reviews
Replacement rubber gasket allows the chamber lid of a FreeZone Freeze Dryer to seal to the chamber during the lyophilization process.For use with FreeZone Freeze Dryer. 9'' x 1/2'' for -50°C freeZone. Sold in each.


Labconco 7545800 Borosilicate Glass Adapter for Fast-Freeze Flask, 45 Degree Bend, 0.75" Diameter
By Labconco
In Stock
$35.26
$22.00
You Save: 38%

mpn: 7545800,

4.7 out of 5 stars with 58 reviews
Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. Choose borosilicate glass or stainless steel adapters in 1/2'' and 3/4'' diameters.Description: Accessory 45° glass adapter 3/4'' to 3/4''. Number Of Items: 1.


Labconco 7201700 4-Port Manifold, 11.2" Height, 8.6" Width, 8.6" Length
By Labconco
In Stock
$767.81

mpn: 7201700,

4.2 out of 5 stars with 48 reviews
Manifold with four neoprene valves with plastic knobs that accommodate both 1/2'' and 3/4'' adapters for connection of flask. Includes one latching pin. Manifolds are made of type 304 stainless steel and mount atop FreeZone Freeze Dry Systems.4-port. 11.2'' height. 8.6'' width. 8.6'' length.


Labconco 7542700 Fast-Freeze Bottom Flask, 750 mL Capacity, 90.2 mm Diameter, 162 mm Height
By Labconco
In Stock
$178.00

mpn: 7542700,

4.9 out of 5 stars with 12 reviews
Clear glass Fast-Freeze Flask Bottom, 750 ml, 90.2mm dia. x 162mm. High strength borosilicate glass withstands high heat and deep vacuum. Fits Fast-Freeze silicone top (not included). Features flat bottom & wide mouth for easy loading and cleaning. . 750ml Capacity. 90.2mm Diameter. 162mm Height. . . Labconco 7542700 Fast-Freeze Bottom Flask, 750ml Capacity, 90.2mm Diameter, 162mm Height. Country of Origin : United States. Part Number : 1171J05EA. Pack of : 1.750Ml capacity. 90.2Mm diameter. 162


Labconco 7568600 Borosilicate Glass Lyph-Lock Flask Adapter, Connects 24/40 STJ Flask Top to 3/4" Valve
By Labconco
In Stock
$81.44
$54.00
You Save: 34%

mpn: 7568600,

4.0 out of 5 stars with 44 reviews
With vented Standard Taper male joint on one end. The other end is fire polished for attaching Lyph-Lock flasks to valves.Adapters are required to attach Lyph-Lock Flasks to freeze dry valve ports.


Labconco 7505600 Replacement Neoprene Valve for FreeZone Freeze Dryer
By Labconco
In Stock
$26.13

mpn: 7505600,

4.1 out of 5 stars with 42 reviews
Neoprene valve body for Free Zone Freeze Dryers. Molded plastic knob sold separately. For use with Free Zone Freeze Dryer Knob sold separately Sold in eachFor use with Free Zone Freeze Dryer. Knob sold separately. Sold in each.


Master-Bilt 02-145713 Drier F0116C010
By Master-Bilt
In Stock
$65.61

mpn: 02-145713, ean: 0046843103546,

4.5 out of 5 stars with 48 reviews
Master-Bilt 02-145713 Drier, F0116C010.This is a genuine OEM (Original Equipment Manufacturer) part. Master-Bilt has been the rock solid refrigeration solution for 75 years for the food service industry.Genuine oem replacement part. Master-Bilt has been the rock solid refrigeration solution for 75 years for the food service industry. Use genuine oem parts for safety reliability and performance.


Labconco Fast Freeze 7541100 Borosilicate Glass Wide Mouth Flat Bottom Complete Flask, 750ml Capacity
By Labconco
In Stock
$281.44
$269.00
You Save: 4%

mpn: 7541100,

4.7 out of 5 stars with 46 reviews
These Labconco fast freeze flasks are quick to handle and load, this flat borosilicate glass fast-freeze flask comes with a silicone rubber snap-on top to provide reliable, high-vacuum seals and eliminate risks of contaminants in samples. The vacuum grease also aids in eliminating contamination while also reducing spillage and sample loss. The fast-freeze flask features a wide mouth to load samples fast and a flat bottom to reduce spills and provide balance. They are compatible with all major br



Viewing Page 3 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - microscopeuniverse.com. All Rights Reserved.