Addition Funnels / Lab Funnels - Page 3


Save on Addition Funnels (in Lab Funnels) at Microscope Universe, Page 3 [148]. Top brands include ACE Glass, & Deschem. Hurry! Limited time offers. Offers valid only while supplies last.



ACE Glass 7262-54 Addition Funnel, Cylindrical, Graduated, 1: 5 PTFE Plug, 500 mL Capacity, 1 mL
By ACE Glass
In Stock
$264.00

mpn: 7262-54,

4.3 out of 5 stars with 52 reviews
With standard taper stopper joint. Stopcock available 1: 5 PTFE plug. Stopper size is standard taper 24/40. For replacement Stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper not supplied.Cylindrical. Graduated. 1: 5 ptfe plug. 500Ml capacity.


ACE GLASS 7272-40 ACE Glass Addition Funnel, Pilot Size, Complete with #25 PTFE Coupling and 8mm Bottom Glass Stopcock Adapter with PTFE Plug, 19L Capacity
By ACE Glass
In Stock
$1,078.82

mpn: 7272-40,

4.6 out of 5 stars with 23 reviews
Large separators funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thread and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete unit consists of the funnel body, coupling with two O-Rings, and stopcock.Pilot size. Complete with #25 ptfe coupling and 8 mm bottom glass stopcock adapter with ptfe plug. 19L capacity.


Deschem 2000ml,24/40,Glass Pressure Equalizing Funnel,2L,PTFE Stopcock,Lab Glassware
By Deschem
In Stock
$99.99

mpn: 331182526808, ean: 6971311071499,

4.8 out of 5 stars with 40 reviews
2000ml,24/40,Pressure Equalizing Funnel,With Glass StopcockAddition Funnel With Pressure Equalizing TubeGround Joint On Top And BottomJoint is 24/40PTFE StopcockDropping Tube Inside The Bottom Joint.Capacity: 2000mlMaterial: Borosilicate Glass 3.3Deschem Science Supply. Be Made From G3.3 Borosilicate Glass. Annealing Point ------560℃. Linear Coefficient of Expansion------ 32×10-7/℃. Softening Point------820℃.


ACE Glass 7278-15 Addition Funnel, Jacketed, 4mm PTFE Stopcock, 1000mL Capacity, 24/40 Joint
By ACE Glass
In Stock
$528.96

mpn: 7278-15,

4.9 out of 5 stars with 8 reviews
Graduated addition funnels similar to 7268 series, except with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is either 2 or 4mm bore PTFE plug. Bottom drip tube extends to the edge of the lower, inner standard taper, joint. Top outer reinforced joint size matches the bottom joint size. Side hose barbs are size D for 3/8-in ID tubing.Jacketed. 4mm PTFE stopcock. 24/40 joint. 1000mL capacity.


Deschem 1000ml,24/40,Glass Pressure Equalizing Funnel,PTFE Stopcock,1L,Lab Glassware
By Deschem
In Stock
$62.00

mpn: 231193491250, ean: 6971311071505,

4.3 out of 5 stars with 31 reviews
1000ml,24/40,Pressure Equalizing Funnel,With Glass StopcockAddition Funnel With Pressure Equalizing TubeGround Joint On Top And BottomJoint is 24/40PTFE StopcockDropping Tube Inside The Bottom Joint.Capacity: 1000mlMaterial: Borosilicate Glass 3.3Deschem Science Supply. Be Made From G3.3 Borosilicate Glass. Annealing Point ------560℃. Linear Coefficient of Expansion------ 32×10-7/℃. Softening Point------820℃.


ACE GLASS 7272-10 ACE Glass Addition Funnel Body, Pilot Size, 25 Ace-Thread Bottom, 19L Capacity
By ACE Glass
In Stock
$639.01

mpn: 7272-10,

4.3 out of 5 stars with 41 reviews
Large separators funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thread and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete unit consists of the funnel body, coupling with two O-Rings, and stopcock.Pilot size. 25 ace-thread bottom. 19L capacity.


ACE Glass 7272-04 Addition Funnel Body, Pilot Size, 25 Ace-Thred Bottom, 9.5 L Capacity
By ACE Glass
In Stock
$404.02

mpn: 7272-04,

4.6 out of 5 stars with 24 reviews
Large separator funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete unit consists of the funnel body, coupling with two O-Rings, and stopcock.Pilot size. #25 ace-thred bottom. 9.5L capacity.


ACE GLASS 7299-12 Addition Funnel, Graduated, Pressure Equalizing, 15 mm Diameter, 125 mL Capacity
By ACE Glass
In Stock
$421.00

mpn: 7299-12,

4.1 out of 5 stars with 16 reviews
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thread at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thread on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when secured with 7506-06 Bushing and FETFE O-Ring (not supplied). With pressure equalizing arm and 0-3mm threaded PTFE stopcock plug. For replacement plug, order 8189-43.Graduated. Pressure equalizing. 15Mm


ACE Glass 7262-50 Addition Funnel, Cylindrical, Graduated, 1: 5 PTFE Plug, 125 mL Capacity, 1 mL
By ACE Glass
In Stock
$166.00

mpn: 7262-50,

4.1 out of 5 stars with 49 reviews
With standard taper stopper joint. Stopcock available 1: 5 PTFE plug. Stopper size is standard taper 24/40. For replacement Stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper not supplied.Cylindrical. Graduated. 1: 5 ptfe plug. 125Ml capacity.


ACE GLASS 7299-34 Addition Funnel, Graduated, Pressure Equalizing, 15 mm Diameter, 500 mL Capacity
By ACE Glass
In Stock
$495.00

mpn: 7299-34,

4.7 out of 5 stars with 49 reviews
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thread at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thread on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when secured with 7506-06 Bushing and FETFE O-Ring (not supplied). With pressure equalizing arm and 0-3mm threaded PTFE stopcock plug. For replacement plug, order 8189-43.Graduated. Pressure equalizing. 15Mm


ACE Glass 7281-16 Addition Funnel, Jacketed, Pressure Equalizing, 4 mm PTFE Stopcock, 1000 mL Capacity, 29/42 Joint
By ACE Glass
In Stock
$558.67

mpn: 7281-16,

4.9 out of 5 stars with 37 reviews
Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are both in ascending and descending volume. Both top and bottom joints are the same size. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety. 4mm PTFE stopcock plug bore.Jacketed. Pressure


ACE Glass 7272-34 Addition Funnel, Pilot Size, Complete with #25 PTFE Coupling and 8 mm Bottom Glass Stopcock Adapter with PTFE Plug, 9.5 L Capacity
By ACE Glass
In Stock
$843.83

mpn: 7272-34,

4.4 out of 5 stars with 25 reviews
Large separator funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete unit consists of the funnel body, coupling with two O-Rings, and stopcock.Pilot size. Complete with #25 PTFE coupling and 8mm bottom glass stopcock adapter with PTFE plug. 9.5L capacity.


ACE GLASS 7299-06 Addition Funnel, Graduated, Pressure Equalizing, 15 mm Diameter, 60 mL Capacity
By ACE Glass
In Stock
$410.00

mpn: 7299-06,

4.9 out of 5 stars with 26 reviews
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thread at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thread on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when secured with 7506-06 Bushing and FETFE O-Ring (not supplied). With pressure equalizing arm and 0-3mm threaded PTFE stopcock plug. For replacement plug, order 8189-43.Graduated. Pressure equalizing. 15Mm


ACE Glass 7262-58 Addition Funnel, Cylindrical, Graduated, 1:5 PTFE Plug, 2000mL Capacity
By ACE Glass
In Stock
$388.38

mpn: 7262-58,

4.2 out of 5 stars with 15 reviews
With standard taper stopper joint. Stopcock available 1:5 PTFE plug. Stopper size is standard taper 24/40. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper NOT supplied.Cylindrical. Graduated. 1:5 PTFE plug. 2000mL capacity.


ACE GLASS 7299-25 Addition Funnel, Graduated, Pressure Equalizing, 15 mm Diameter, 250 mL Capacity
By ACE Glass
In Stock
$435.44

mpn: 7299-25,

4.0 out of 5 stars with 16 reviews
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thread at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thread on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when secured with 7506-06 Bushing and FETFE O-Ring (not supplied). With pressure equalizing arm and 0-3mm threaded PTFE stopcock plug. For replacement plug, order 8189-43.Graduated. Pressure equalizing. 15Mm


ACE Glass 7262-56 Addition Funnel, Cylindrical, Graduated, 1:5 PTFE Plug, 1000mL Capacity
By ACE Glass
In Stock
$311.48

mpn: 7262-56,

4.2 out of 5 stars with 59 reviews
With standard taper stopper joint. Stopcock available 1:5 PTFE plug. Stopper size is standard taper 24/40. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper NOT supplied.Cylindrical. Graduated. 1:5 PTFE plug. 1000mL capacity.


ACE Glass 7281-18 Addition Funnel, Jacketed, Pressure Equalizing, 4 mm PTFE Stopcock, 1000 mL Capacity, 29/32 Joint
By ACE Glass
In Stock
$558.67

mpn: 7281-18,

4.8 out of 5 stars with 49 reviews
Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are both in ascending and descending volume. Both top and bottom joints are the same size. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety. 4mm PTFE stopcock plug bore.Jacketed. Pressure


ACE GLASS 7272-44 ACE Glass Addition Funnel, Pilot Size, Complete with #25 PTFE Coupling and 8mm Bottom Glass Stopcock Adapter with PTFE Plug, 35L Capacity
By ACE Glass
In Stock
$1,526.63

mpn: 7272-44,

4.7 out of 5 stars with 29 reviews
Large separatory funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete unit consists of the funnel body, coupling with two O-Rings, and stopcock.Pilot size. Complete with #25 ptfe coupling and 8 mm bottom glass stopcock adapter with ptfe plug. 35L capacity.



Viewing Page 3 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - microscopeuniverse.com. All Rights Reserved.